We build our insulators from the highest quality materials designed to last a long time. The plastic insulators are made from UV stabilized polymers for sun resistance, toughness and durability. Gallagher insulators feature long leakage paths and protective shields to achieve optimum performance from today's high powered energizers.
|
 |
Wood Post Staple On Insulator which clamps around steel wire. |
|
|
 |
Economical staple on insulated tube which can be used for wooden or concrete posts. |
|
|
 |
Fitted to a power drill, this drill bit quickly installs Screw in Ring Insulators or Offsets into soft wood posts. |
|
|
 |
Screw in Ring Insulator with angled slot allows quick install and secure holding of wires. No need to drill pilot hole, simply screw into soft wood post using drill bit. |
|
|
 |
Electric fence wire insulator with a solid flat back plus pin. Suitable for fixing onto concrete fence posts. |
|
|
 |
Designed specifically for tape up to 40mm (1½") wide. |
|
|
 |
Large heavy duty shield prevents pulse arcing and minimises power leakage. |
|
|
 |
Suitable for Waratah and Steel T-bar. Wide jaw design to accommodate EquiFence and braid products. |
|
|
 |
Ensure strain is from centre of insulator when tying. Large tracking distance for minimum power leakage. |
|
|
 |
Specially designed to firmly secure 40mm (1½") Polytape (G6240) and Turbo Tape (G6245) on corners. |
|
|
 |
Suitable for fibreglass rod and standards from 6 - 16mm (1/4-5/8”) diameter. |
|
|
 |
Large heavy duty shield prevents pulse arcing and minimises power leakage. |
|
|
 |
Tab design allows for quick and easy installation and removal of wire. Locking bumps to alleviate accidental release of wire. |
|
|
 |
Open face reduces adherence of dust, algae and wire corrosion. Positive locking pin holds insulator on post. |
|
|
 |
Suitable for fences with little stock pressure i.e. dairy. Made from sunlight resistant polypropylene plastic.
|
|
|
 |
Designed for either corner strain insulation or fence start/ end points. |
|
|
 |
Suitable for fibreglass rod and standards from 4 - 10mm (up to 3/8") diameter. |
|
|
 |
Pinlock design for easy installation/removal of wires along drains etc. |
|
|
 |
Strong front latch with ribs for grip. Can accomodate 40mm and 12.5mm tapes and up to 8mm EquiFence. |
|
|
 |
Wide jaw design to accommodate Equifence and braid products. |
|
|
 |
Wide jaw design to accommodate EquiFence and braid products. |
|
|
 |
Specifically designed for Gallagher EquiRope, EquiFence, TurboPlus, or Super Braid. |
|
|
 |
Removable pins for simple insulator repositioning. |
|
|
 |
Recommended as low power/low voltage insulator. Easy to install and remove wires. |
|
|
 |
Easy to attach. Double layered for minimum power leakage. |
|
|
 |
No need to make a hole first, simply screw into soft wood. |
| | |
